large -48VDC inverter recommendation [RE-wrenches]
Christopher Freitas --- OutBack Power
cfreitas at outbackpower.com
Tue Feb 24 19:54:39 PST 2004
What are the AC loads that the system(s) will be powering?
Often the AC loads can be broken up into smaller groups and powered with
several smaller inverter systems more practically.
We can easily make a rackmount version of the FX - it uses 6 "U"s of
space (8.25" tall total) and would fit either 19" or 23" racks. A total
of 10 units just happens to fit in a standard 7 foot tall rack bay.
Christopher
Kurt Albershardt wrote:
>
> They have a 10,000A DC plant and rivers of 750 MCM cable running about
> the place.
>
> Timeframe is probably 2-3 months but I can check to make sure. It could
> easily be setup as several smaller banks, maybe one per 19" or 23" bay.
> What kind of power (complete system with DC & AC disconnects, etc.)
> could you get into a 7' bay?
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list