drawing program [RE-wrenches]

[Christopher Freitas --- OutBack Power]

Dave - I would recommend that you select a drawing program that can 
manipulate and modify .DXF format documents (Autocad files).  We here at 
OutBack have all of our drawings available on our website in this format 
which lets you modify them easily to suit your installations - saving 
you a lot of time when using OutBack products.  

I would take a look at AutoCad Lite - although the learning curve is a 
bit steep - you have the power and compatibility to work with more 
expensive program's file outputs. You can get an older version pretty 
cheap off ebay or software clearance places.   

Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com  
www.outbackpower.com
Arlington WA USA
Tel 360 435 6030  

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------