inverter overload (was transformer inrush) [RE-wrenches]
Allan Sindelar
allan at positiveenergysolar.com
Tue Jan 6 14:15:14 PST 2004
----- Original Message -----
From: "Kirk Herander, VSE" <kirk at vtsolar.com>
> 2) Use several current sensing relays to prioritize the pumps and fridges.
> For instance, if current is sensed on the septic pump circuit, the relay
#1
> will cut power to the well pump.
> If current is sensed on fridge #1 circuit, relay #2 will cut power to to
> fridge #2.
Kirk,
Normally fridges don't draw enough surge to warrant sequencing. I'd be more
concerned about the pumps. Start with the biggest surges as your dominant
priority loads.
Allan @+E
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list