Panel protection.... [RE-wrenches]

[John Veix]

===========================================================
Give Your Team Access to Their PCs from Anywhere. Increase 
productivity with a secure remote-access solution from 
GoToMyPC Pro. Stay in touch with your office. FREE TRIAL:
http://click.topica.com/caaccMVbz8Qcsbz9JC9a/ ExpertCity
===========================================================


Hi all,

I've a remote local government body installation that uses 3 of BP4160H panels for the control of a water race. The panels are mounted on top of a small concrete building that has raised metal sides seemingly built to military standards. Very heavy metal, indeed.

However, within a month of installation, the panels were wrecked by vandals throwing huge rocks at the panels surface.

Although I will be installing 6mm (approx 1/4") thick polycarbonate over the panels to protect against the rock damage, is there anything else that can be done to avoid this happening.  Short of installing a minefield or machine-gun nest, of course.

Any known manufacturers that make a protective surface for panels?

This is such a really good application, I don't want the local govt body becoming discouraged by idiots destroying it. 

                    thanks in advance,                    John Veix, Christchurch, N.Z.
[Non-text portions of this message have been removed]

===========================================================
Cancel your low-carb diet. Lose weight. Choose your own 
foods. Learn more about our program at:
http://click.topica.com/caaccM7bz8Qcsbz9JC9f/ Dr. Smith
===========================================================

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read

List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------