Mounting boxes on large poles [RE-wrenches]
Ken Hulet, Engineering Services Co.
Ken.Hulet at redwoodalliance.org
Fri Apr 30 09:36:19 PDT 2004
<x-flowed>
===========================================================
Domains as low as $4.95!
Limited Time! ICANN Accredited GoDaddy!
http://click.topica.com/caab7pQbz8Qcsbz9JC9a/ GoDaddy
===========================================================
Probably a trivial question but I'm interested in your methods for
mounting boxes on 8 inch pipes. We've used a welded on bracket where
the owner had welding equipment and did the work. I've also seen 8 inch
U-bolts but I'm looking for other solutions.
Thanks as always!
Ken Hulet
Ken & Chris Hulet
Engineering Services Co.
P.O. Box 4
Blanchardville, WI 53516
608.523.3726
http://www.revolutionearth.com
===========================================================
Let University of Phoenix make 2004 your year. Evening,
weekend or FlexNet® classes over 130 locations. Look
into our programs and get the degree that gets you going!
http://click.topica.com/caab6aBbz8Qcsbz9JC9f/ UOP
===========================================================
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://lists.topica.com/lists/RE-wrenches/read
List rules & etiquette: www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list