Adding MX60 to Power Panel [RE-wrenches]

[Ken Hulet, Engineering Services Co.]

<x-flowed>
I have a customer that has a 4024 Power Panel that he used with a 
generator, NO PV.

He now wants to add some PV with an Outback controller. We've always 
used the Outback PSDC which makes this all easy with it's positive DC 
bus. I've looked at all the Xantrex docs I could find bit haven't found 
a schematic of how they expect the CC to be wired in. I know we need to 
add a breaker but do they expect just to add a second wire under a lug 
of the DC250 breaker? Can someone point us in the right direction? 
Thanks.


Ken & Chris Hulet
Engineering Services Co.
P.O. Box 4
Blanchardville, WI 53516

608.523.3726

http://www.revolutionearth.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

For Topica's complete suite of email marketing solutions visit:
http://www.topica.com/?p=TEXFOOTER
--^----------------------------------------------------------------



</x-flowed>