SW5548 interference again [RE-wrenches]
Keith Cronin
sales at islandenergy.net
Thu Feb 26 09:48:48 PST 2004
Hello Gang
I am again having issues with a dual SW5548 system on a mega mansion
with all of these sophisticated dimmers/speed controls for fans as well
as the Leviton brand MD101 dimmers for the low voltage MR16 lamps
throughout the home. I have tried GE 4uf 370 VAC run capacitors to clean
the ripple, but it seems when the power goes out, and the "19" ceiling
fans are on as well as the dimmers for the lighting, the lights in some
areas start to do the disco strobe and some of the fans start to hum.
Anyone know if it is due to the 34-52 steps in the SW and because it
gets worse on the steps as the machines get loaded down?
Any suggestions out their? Anyone know of any line filter/conditioners?
I know I could probably switch out the units to some outback's, but the
client isn't ready for that yet!
thanks
Keith Cronin
President
Island Energy Solutions Inc
318A Kuulei Rd
Kailua, HI 96734
808-262-3268 Tel
808-263-0338 Fax
keith at islandenergy.net
www.islandenergy.net
<http://www.islandenergy.net>
[Non-text portions of this message have been removed]
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list