voltage clamp [RE-wrenches]

[larry]

Darryl. Try Zhan electronics model # CH25045F-S.
www.zahninc.com    262-835-9200


Thanks Solar Ray
If you had a 120 volt DC wind mill and no longer had a
controller, and this was going to be grid tied, how
would you convert to 120 volt to 48 volt for the
battery and grid tie? It has a battery because the
owner wants a UPS capability, It has a 48 volt pv
system that I wanted to intergrate with.

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------