MPPT with Batteries [RE-wrenches]
Christopher Freitas --- OutBack Power
cfreitas at outbackpower.com
Fri Nov 14 18:07:10 PST 2003
Joel -
A single OutBack MX60 will work well for your application - it will
handle over 3000 watts of PV array with 48 vdc battery systems -
maximum PV array open circuit voltage of 140 VDC as well. The MX60 is
also easily swapped with an old C40 controller - the knockouts and
mounting holes just "happened" to be in the same locations and no change
in the negative/grounded conductor wiring is required.
> Also, there's not much grid-tie/battery options on the list of inverters
> eligible for the CEC rebate. See
Expect to see a couple of models from OutBack very soon on this list.
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas @ outbackpower.com www.outbackpower.com
Tel 360 435 6030 Arlington WA USA
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list