NABCEP exam [RE-wrenches]

David Palumbo, Independent Power & Light ipl at sover.net
Sun Oct 26 06:08:44 PST 2003


There were eleven of us testing in Randolph, VT

-----Original Message-----
From: Dan Whigham, SC Solar [mailto:DWhigham at scsolar.com]
Sent: Saturday, October 25, 2003 10:51 PM
To: RE-wrenches at topica.com
Subject: Re: NABCEP exam [RE-wrenches]


We had 3 in Knoxville TN, which basically covered the South East US. 


Best Regards,

Dan Whigham
SC Solar
www.scsolar.com
803-802-5522


----- Original Message ----- 
From: "Jeff Yago" <jryago at wwjv.net>
To: <RE-wrenches at topica.com>
Sent: Saturday, October 25, 2003 9:10 PM
Subject: RE: NABCEP exam [RE-wrenches]


> 
> 
> I assume those of you in the "solar" states had a better showing, but
> the Maryland test site had a total of 6, and that is for Maryland,
> Virginia, and the D.C. area.
> 
> As for the test, it is clear that a major amount of work and
> preparation went into this test program and getting this off the
> ground.  I was really surprised that the material covered was actually
> about the areas you need to know to install many different systems,
> and the people who made up this material clearly knew what they were
> writing about.  That's really refreshing!
> 
> I was expecting only NEC questions (and believe me there were
> plenty!), but there were also many questions and calculations required
> concerning array mounting, structural issues, system commissioning,
> worker safety, grid tied, off grid, generator based, DC only, water
> pumping, site analysis, shading issues, battery issues, ground mount,
> pole mount, roof mount, ground fault issues, grounding issues, and you
> better know how these systems are different and why.  The practice
> test provided with the preparation materials made it very clear up
> front that this was not going to be easy.
> 
> 
> My only concern is that to pass it you need serious training in many
> areas not related to the NEC, yet, I think most "average" electricians
> who know the NEC by heart and should learn the material will not feel
> they need to obtain a certification they think is not needed.
> 
> Most that I talked too feel the liability issues, insurance companies,
> and banks making home loans are already "on their side", since they
> all want a "licensed" electrician doing any wiring work.   After all,
> its just running wire and conduit isn't it?
> 
> If the attendance we had is any indication, we may all need to work
> harder in promoting this certification program and the reasons it is
> needed out there.
> 
> Just my 2 cents,
> 
> Jeff Yago
> 
> - - - -
> To send a message: RE-wrenches at topica.com
> 
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
> 
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
> 
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
> 
> Hosted by Home Power magazine
> 
> Moderator: michael.welch at homepower.com
> 
> 

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------






More information about the RE-wrenches mailing list