Lags vs. Timberloks [RE-wrenches]
Darryl Thayer
daryl_solar at yahoo.com
Sun Oct 19 19:29:21 PDT 2003
Matt
Thanks for the suggestion I will try it next time.
And let everyone know my results.
Darryl
--- mlafferty at universalenergies.com wrote:
> Darryl Wrote:
>
> > I use SS bolts and nuts on battery connections,
> have found that they
> sometimes
> get tight before they tighten up
>
> Darryl & Wrenches,
>
> I have used Penetrox (Burndy Brand) and Ideal's
> anti-oxidant compounds
> on battery terminals and the threads of their
> clamping bolts for over 15
> years with extremely positive (no pun intended)
> results. I use the type
> formulated for use on AL and AL-CU connections.
> (Gray, gooey stuff)
>
> I don't know if this is "factory approved" or not,
> it's just what I've
> experienced. I have used it in all of my vehicles
> as well as quite a
> few marine inverter applications.
>
> I don't rightly know if it helps with SS galling,
> but I do know that it
> goes together easier and leaves a mess on my
> wrenches and sockets! I've
> never had a connection loosen up unless I put a
> wrench on it and there
> has never been a case where taking it back apart has
> given me a problem
> at all.... Other than the goo is still the same and
> I have to wipe my
> tools off, of course, even many years later! I
> have never seen a case
> where corrosion on the terminals has occurred after
> using it, either.
>
> Matt Lafferty
> Universal Energies Institute
> mlafferty at universalenergies.com
> (916) 422-9772
> (916) 628-7694 Cell
> (916) 914-2247 Fax
> www.universalenergies.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette:
> http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios:
> www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
--^----------------------------------------------------------------
> This email was sent to: daryl_solar at yahoo.com
>
> EASY UNSUBSCRIBE click here:
> http://topica.com/u/?bz8Qcs.bd5Ekw.ZGFyeWxf
> Or send an email to:
> RE-wrenches-unsubscribe at topica.com
>
> TOPICA - Start your own email discussion group.
> FREE!
>
http://www.topica.com/partner/tag02/create/index2.html
>
--^----------------------------------------------------------------
>
>
>
>
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list