Coldest Daytime Ambient Temperature [RE-wrenches]

Joel Davidson joeldavidson at earthlink.net
Tue Oct 14 19:05:36 PDT 2003


John,
-15 gives you the same NEC690.7 Voc 1.25 correction factor as Torrey, UT's
lowest temperature -35 F for February 1989.
Best regards and stay warm,
Joel Davidson

John Raynes wrote:

> Hi Joel,
>
> We're in a very sparsely populated area, that is situated in a high
> mountain valley with its own unique micro-climate.  All of which is to say
> that I'm finding weather data specific to Wayne Co. Utah is hard to come
> by.  (I imagine that it's out there somewhere...)   At this point I'm
> considering our worst case ambient to be about -15 F at 7000 ft. because of
> the heat loss on our cold clear winter nights.
>
> John Raynes
> RE Solar
>
> At 03:10 PM 10/14/03 -0400, you wrote:
> >John,
> >You are probably right. What ambient temperature do you use for NEC Table
> >690.7?
> >Best regards,
> >Joel Davidson
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------






More information about the RE-wrenches mailing list