Battery choice: one string or two? [RE-wrenches]
Darryl Thayer
daryl_solar at yahoo.com
Thu Oct 9 10:01:25 PDT 2003
Hello this is a great thread, I am learning a lot.
If a person goes to 2 volt cells, could LED's be
attached to each cell, such that if a cell died, the
led would go out? Thereby telling if a cell failed?
Has anyone tried this?
Daryl
--- Allan Sindelar <allan at positiveenergysolar.com>
wrote:
> Blair,
> The FX replaced a Trace 2024SB or 2524SB, the series
> before the U series. He
> took a lightning hit, and fast repair service (and
> in many cases slow repair
> service) is gone for this series.
>
> The FX2024 has a 60A charge rate. That's C/20 on
> either string choice.
> What's the problem?
>
> ----- Original Message -----
> From: "blair Tump may" <tump at midcoast.com>
>
> > Allen what inverter was he replacing?
> >
> > The FX / Outback inverters are limited w/ their DC
> charge rate. A large
> > cell, we also spec the KS series 2 volt cells,
> will take for ever to
> > charge/ a generator w/ a single inverter.
>
> Blair, I missed your point here:
>
> > The other advantage we always
> > stress, in the event a cell goes bad, we can
> reset the inverter's low
> > voltage set points, remove the cell, contact RAE
> battery and have Roy send
> > a replacement cell ASAP. Can't do that w/ those
> golf carts...... System
> > will still work while waiting for a replacment.
>
> Thanks,
> Allan
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages:
> http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette:
> http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios:
> www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list