Remote SW display problem [RE-wrenches]

[Christopher Freitas - OutBack Power]

You should try it with another known good cable on the inverter at the 
customer's location. Its not likely but is a possible problem with the 
cable - its shouldn't cause this type of problem as the info is 
transmitted to the remote display as a single line of data that just 
"wraps" itself on the display onto the two lines. 

Its also possible that the shipping process restored the connection of 
the glass LCD panel to the circuit board - the interconnections on these 
can be a bit iffy with some brands of displays. 

Christopher Freitas
OutBack Power Systems, Inc.
cfreitas at outbackpower.com  www.outbackpower.com
Tel 360 435 6030  Arlington WA USA

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------