PS2512 glitches [RE-wrenches]

[Bruce Geddes]

Hi Roy,
            Thanks for that info.  Next time I am out there I will try it.

Cheers,
Bruce


----- Original Message -----
From: "Roy Dyngen" <roy.dyngen at xantrex.com>
To: <RE-wrenches at topica.com>
Sent: Tuesday, September 30, 2003 4:26 AM
Subject: RE: PS2512 glitches [RE-wrenches]


> Bruce,
>
> You should not need to reload your parameters at all.  If you press the
> "Reset to factory defaults" button at anywhere in the menu except under
menu
> 3 where is states "Press reset now for defaults" the button only performs
a
> screen refresh.  Have you tried cutting the shield foil in the cable as
> Allan mentioned in an earlier post?
>
> -----Original Message-----
> From: Bruce Geddes [mailto:b.geddes at clear.net.nz]
> Sent: Thursday, September 25, 2003 3:15 PM
> To: RE-wrenches at topica.com
> Subject: Re: PS2512 glitches [RE-wrenches]
>
> Hi All,
>             I have an installation down here that has the same problem.
> SW3024E with the remote cable (SWRC50)  in a seperate conduit but
> periodically the disply turns to custard or moves one character to the
left!
> Only way to clear it is to reset and then reload the operating parameters.
> This one is on an island so a boat trip each time.  The inverter panel is
> unaffected and operates normally.
>
> Bruce Geddes
> PowerOn
>
>
> ----- Original Message -----
> From: "Bob Ellison, Alternative Energy Systems" <ellison at gisco.net>
> To: <RE-wrenches at topica.com>
> Sent: Thursday, September 25, 2003 9:06 PM
> Subject: RE: PS2512 glitches [RE-wrenches]
>
>
> John,
> I have seen goofy remotes with the Sw series digital readout getting
> scrambled when the customer put both the ac and remote wire in the same
> conduit together, It is ok for a while then goes goofy till you unplug it.
>
> Bob
>
> RE. Ellison
> Supplier of;
> Alternative Energy Systems & Supplies
> 34642 Countryman Road
> Theresa, NY. USA
> 13691-2076
>
>
> -----Original Message-----
> From: Roy Dyngen [mailto:roy.dyngen at xantrex.com]
> Sent: Wednesday, September 24, 2003 3:18 PM
> To: RE-wrenches at topica.com
> Subject: RE: PS2512 glitches [RE-wrenches]
>
>
> Hi John,
>
> Did they find something wrong with the remote at Tekris?  Although I have
> seen some scrambling on the display of the first run of the units (the
> inverter, not remotes), I've never heard of problems with the LED's
randomly
> flashing.  How much is the output wavering and under what conditions?  I
> wonder if the problem has always been with the inverter, not the remote.
>
> Roy Dyngen
>
> -----Original Message-----
> From: John Blittersdorf, Cent. VT Solar & Wind [mailto:cvsolar at aol.com]
> Sent: Wednesday, September 24, 2003 10:12 AM
> To: RE-wrenches at topica.com
> Subject: PS2512 glitches [RE-wrenches]
>
>
> I have a customer with a self installed PS2512.  He has had numerous
> problems
> with his remote control panel, having sent it for repair twice to Tekris
and
>
> now he is having problems with the inverter as well.  He said the LEDs on
> the
> bottom are randomly flashing, not consistent with the mode it is in and he
> has
> had the voltage output waver up and down.  I haven't witnessed this
> firsthand
> or checked the output.  Has anyone had this type of problem with the PS.
I
> didn't want to sell it to him in the first place but he didn't want to
give
> up
> his 12V system when he needed sinewave power for his heater.  He is now
> buying
> a Prosine.  I hope he is not jumping from the frying pan to the fire.  Any
> more comments good or bad on the ProSine 2000 watt with charger?
>
> John
> CVSolar
>
> --
> [Non-text portions of this message have been removed]
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
>
>
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------