Website link PV panel degradation [RE-wrenches]
Todd Cory, Mt. Shasta Energy Services
toddcory at finestplanet.com
Thu Sep 25 08:20:30 PDT 2003
Unfortunately the test results are after the first year only. I am curious if
that level of degradation continues. I have heard thin film modules lose most
after the first month or so and then the rate of degradation decreases
substantially. I would like to see actual test data on this.
Todd
Marco wrote:
> >From the website below:
>
> Uni-Solar 64, hot out of the box 73.6 watts, 12 months later = 52.1 watts, a
> drop of 29 percent. Anyone care to explain why one should ever consider a
> Uni-Solar 64 module or other Uni-Solar a-Si modules for that matter? Maybe
> BP Solar knew more than most people when they stopped their a-Si line last
> year...Interesting that thin films have been touted for decades as the Holy
> Grail to dramatically bring down the cost of PV power. Yet for decades,
> crystalline silicon continues to be dominant. And with manufacturers like
> BP Solar and Sharp getting more power out of the same surface areas,
> crystalline Si would seem to be in little danger of losing its preeminent
> position.
>
> marco
> ProVision Technologies, Inc.
> Hilo, Hawai'i
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list