Drilling contractor needed [RE-wrenches]

[Scott Anderson]

Bob
Saw some of the other comments and suggestions. All good however an
engineering contractor like me will do it for you using there subs and mark
it up. Go to the source and call a soils engineer or two, these guys inspect
the holes  the drillers drill and will know who will give you a fair shake
and won't gouge you. OR find a distributor of earth augers or parts in your
area and they will tell you who has the equipment and skills to do what you
need.
BE FOREWARNED that there are almost as many ways to drill a hole as there
are to skin a cat, some are better than others for accuracy and cost, every
guy that drills holes will tell you the system he uses is best (
coincidentally he doesn't have any of that "cheap" equipment that the other
guy is trying to "con off on you" ) If you have more specific details (
i.e.. pole, tower, multiple location, depth, expected soil type, terrain ? )
contact me of list, and I'll try and steer you right
Scott

Anderson-Niswander Construction Inc.
A-General Engineering Contractor
Redwood City  CA 94063
Email:  scott_anderson at earthlink.net

----- Original Message ----- 
From: "Bob Ellison, Alternative Energy Systems" <ellison at gisco.net>
To: "RE-wrenches" <RE-wrenches at topica.com>
Sent: Friday, August 22, 2003 11:51 PM
Subject: Drilling contractor needed [RE-wrenches]


I am looking for a contractor who can "drill and bell" for a tower in the
northern Vermont area, around Burlington.
Anyone have any ideas where to find someone who does this type of work? The
phone book is of little help.

Thanks,
Bob


RE. Ellison
Supplier of;
Alternative Energy Systems & Supplies
34642 Countryman Road
Theresa, NY. USA
13691-2076

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------