Just how long can metering wiring go? [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Wed Aug 6 13:31:44 PDT 2003
HI Todd,
What voltage are you using? I've got one outthere that is #16 wire at
around 400', but it's 48v which makes it easy.
Its a trimetric.
You can always call Ralph.
jay
Peltz Power
----- Original Message -----
From: "Todd Cory, Mt. Shasta Energy Services" <toddcory at finestplanet.com>
To: "Wrenches" <RE-wrenches at topica.com>
Sent: Wednesday, August 06, 2003 8:36 AM
Subject: Just how long can metering wiring go? [RE-wrenches]
> Group,
>
> I am also needing some way if at all possible to run wires for a system
> meter about 350 feet. I have run a e-meter 150 feet (here at my home) by
> using home made twisted #12 wire. The only negative thing I can see is
> that my voltage reading on the meter is .01 low so no real big deal. Amp
> hours are still accurate. But 350 feet is a long ways. Too bad no one
> makes a wireless unit like the weather stations use. Anyway, any
> suggestions would be appreciated.
>
> Thanks,
>
> Todd
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list