McGraw Edison Ni-Cads (KOH electrolyte) [RE-wrenches]
Bill Loesch, Saint Louis Solar
bill_loesch at compuserve.com
Wed Jul 2 06:22:12 PDT 2003
RE-wrenches said:
>Hello John and John
>The ED-120 cells which John has are, indeed, NiCd even though they
>have the Edison name on them. They have a nominal voltage of 1.2 VDC
>and a capacity of 120 Ampere-hours. I have run many of these for
>years.
>Electrolyte specific gravity does NOT change with state of charge,
>but remains constant.
>These are rugged and long lived cells. If they have not been ruined
>by operating them for long periods with high carbonate levels, then
>an electrolyte replacement will bring them back to useful life.
>Please contact me off list for details on electrolyte replacement.
>Richard
>Home Power
Richard,
Interested in the ni-cad electrolyte details, too.
This subject comes up regularly, is there not some spot where this
information could be stored? Searching Topica would be one solution, but
very often the subject line has no relation to the message content.
TIA,
Bill Loesch
Solar 1 - Saint Louis Solar
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list