Induction motor on Trace DR series [RE-wrenches]

[Roy Butler, Four Winds RE]

<x-flowed>
For what it's worth.....I have been powering my home and business with a
DR3624 since June of 1997. A 10" table saw with  1.5 HP induction motor starts
like a champ, even when the batteries are 60-70% discharged. No noticeable
increase in heat while running. The same holds true for 1 HP air compressor
motors and the like. FYI....that 10"/ 1.5HP table saw will NOT start up on
an SW 4024 or a SW5548.

Roy Butler
Four WInds Renewable Energy, LLC
Arkport, NY
www.four-winds-energy.com



>>
>>
>>    
>>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================



</x-flowed>