Conduit inside the tracker pole [RE-wrenches]

[Scott Anderson]

Ken:
If I'm understanding your question right. Bush in to the pole then bush out
underground to conduit. shouldn't be a code issue as you are actually
running your drop lines in 6" ridged conduit !
Good Luck
Scott

Scott M Anderson
Anderson-Niswander Construction Inc.
Redwood City  CA 94063
Email:  scott_anderson at earthlink.net
----- Original Message ----- 
From: "Ken Hulet, Engineering Services Co." <esco at revolutionearth.com>
To: <RE-wrenches at topica.com>
Sent: Saturday, June 14, 2003 3:03 PM
Subject: Conduit inside the tracker pole [RE-wrenches]


> I have a customer that:
>
> A. Owns a machine shop
>
> B. has big sign design experience
>
> C. Wants to fabricate a flange mount for his tracker pole
>
> D. Wants to run the conduit inside the tracker pole
>
> Questions and details:
>
> We thought we could stop the conduit a foot or so of where the combiner
> box will be mounted and cut a hole and add a bushing to get inside the
> pole. Basically the bend of wire from the bushing to the upright
> conduit would NOT be in conduit.
>
> Can you see problems or code issues with this?
>
> Thanks,
> Ken
> ________________________________
> If WE don't make a better world... Who will? Government?  Corporations?
>   Someone else?
>
> Ken Hulet
> Engineering Services Co.
> Blanchardville, WI
> 608.523.3726
> http://www.revolutionearth.com
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================