Where is Ground Clamps [RE-wrenches]

[mlafferty at universalenergies.com]

Dean:

This is a really good idea... I have a couple of suggestions if it's not
too late.

I would recommend at least a 3/4" long screw.  In addition, it might be
wise to see what it would take to have them come in Green... This would
not necessarily make the screw "listed for the purpose" but it might
make an inspector not think twice about the application.  Come to think
of it, I'm pretty darned sure that the bastard-thread Taiwanese screws
that come with the hardware kits for lights, etc. aren't listed either.
Lord knows they don't fit anything!

2-Cents of Sunshine!

PS - My apologies to all for the double or triple posts... The first
couple of times I clicked "Reply" my machine just threw the thing out
there without popping up a message window.  

Matt Lafferty
Universal Energies Institute
mlafferty at universalenergies.com
(916) 422-9772
(916) 628-7694 Cell
(916) 914-2247 Fax
www.universalenergies.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================