Power factor issues [RE-wrenches]
William Miller
wrmiller at slonet.org
Thu May 15 13:14:33 PDT 2003
Allan:
Web search on "Power Factor Test Equipment:"
672001 Power Factor Test Set
Fully-automatic power factor test also known as the Delta 2000. Measured
quantities include voltage, current, power (loss), power factor,
dissipation factor and capacitance. Continuously adjustable output from 0
to 12 kV. Designed to work in high interference switchyards up to 765 kV.
Performs all standard Ungrounded Specimen Tests (UST) and Grounded Specimen
Tests (GST). Built-in capability for storing, printing and downloading test
results.
and:
http://www.rhctest.com/industrial_electrical/html/tek700.html
and:
http://www.fluke.com/Download/ElectricalPower/43b_spex.pdf
Maybe some of the Endecon folks can chime in here....
Good Luck!
William Miller
At 08:12 PM 5/13/2003 -0600, you wrote:
>This is a repost of a request I made on 4/2; nobody responded to any of the
>questions. I'm trying one last time. Maybe nobody cares, in which I won't
>either.
>Allan
>
>----- Original Message -----
>> Fellow Wrenches:
>> 1. What do you use to measure power factor on AC loads? It looks like the
>> Brand 20-1850 is a good bet, but is there anything that's good, easy to
>use,
>> and cheaper?
>>
__________________________________________________________________
William Miller
Miller Power and Communications
PO Box 50, Santa Margarita, CA 93453
Voice :805-438-5600 Fax: 805-438-4607
email: wrmiller at slonet.org
http://millerpowerandcomm.com
License No. C-10-773985
_____________________________________________________________
Compatibility:
Word processor: WP10
Spreadsheet: Quatro Pro 10
CAD: Microstation 95, DXF, Visio 4.1T
_____________________________________________________________
"Every decent man is ashamed of the government he lives under."
H. L. Mencken
__________________________________________________________________
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list