Over current protection for charge controllers[RE-wrenches]

[Todd Cory, Mt. Shasta Energy Services]

William,

Yes a positive bus in the DC250 would be nice.

Do you know Outback now has a 1/2 size PSDC?

Todd


William Miller wrote:

> Friends:
>
> Thanks everyone for the information on this subject.  I usually install
> upstream and downstream breakers for charge controllers.  This is only the
> second Power Panel I've installed, and I wondered if Xantrex knew something
> I did not.
>
> I installed one DC250 where I had to dremel one of the side breaker slots
> larger to accept a 5th breaker for DC loads!
>
> Another complaint I have is the lack of a DC bus positive bus in these
> enclosures.
>
> On the other hand, it is sometimes difficult to find room for an Outback PSDC.
>
> William Miller
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================