6" poles [RE-wrenches]

[Nick Nicholas, APS]

Hi Allen:
    When I have used 2" galv electrical conduit from the electrical
distributor, it has cost me significantly more than 2" galvanized steel pipe
from the plumbing distributor.  I always figured 6" would be similar.
Nick
Alternative Power Systems
www.alternativepowersystems.com
aps at sbcglobal.net
135 Colfax Ave.
Grass Valley, CA 95945
(530) 274-0588 phone
(530) 274-0589 fax
----- Original Message -----
From: "Allan Sindelar" <allan at positiveenergysolar.com>
To: "New wrenches posting" <RE-wrenches at topica.com>
Sent: Tuesday, April 29, 2003 12:50 PM
Subject: 6" poles [RE-wrenches]


> Wrenches,
> Sometimes I come across something so obvious that I feel stupid for never
> having realized it. Maybe someone else is just as adept at overlooking the
> easy answer as I can be. Here's one:
>
> We prefer pole-top arrays where possible. We order in 6" Sch. 40 steel and
> weld rebar to it, and it's expensive and a hassle to deal with. Thanks to
> John Leibendorfer of UniRac for this:
>
> 1. 6" rigid conduit is Sch. 40 pipe, it's way cheaper, it's galvanized,
and
> the electrical wholesaler will deliver it for free. Weight is still 179
> lbs., so careful!
>
> 2. Don't bother with a fancy rebar cage, and for sure don't bother welding
a
> cage to the pipe, it's not necessary. I'll still make a 18" square of #4
> rebar to drop in around the pipe near the top, but that's a whole lot
easier
> than welding.
>
> Allan, recently enlightened at +E
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================