Fw: Interesting installation [RE-wrenches]

[Don Loweburg, Offline]

In a message dated 04/21/2003 10:13:45 AM Pacific Daylight Time, 
billb at endecon.com writes:

> If manufacturers were more closely tied to their
> installations (as they should be) they would help insure that their 
> products
> are installed properly and working as designed.
> 

Bill, this is a good point. As you know, manufacturers were intitially very 
reluctant to participate in certification. A few now are beginning to pay 
attention to building a knowledgable installation infrastructure. However 
they all are still mainly driven by volume sales. "Git em out the door"

Don

--
[Non-text portions of this message have been removed]

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================