low temp charge control [RE-wrenches]
Greg Egan
gegan at renewalaska.com
Wed Feb 26 21:16:10 PST 2003
Drake,
I've had excellent results using the Sunsaver 6's and 10's. My customers use
them for mountain top repeaters and the like. I'm sure they've seen colder than
-40F for extended periods. Morningstar claims they ahve ~ 3 failures per 1000.
I know of ~ 100 in the field with one failure so far.
Greg Egan
Electrical Energy wrote:
> Does anyone know of a reliable low temperature 12 volt, 8 amp continuous
> charge controller that is good for gel batteries. Lyncom units failed two
> years in a row during cold snaps in the mountains of Colorado. The control
> needs to be good for at least -20 F.
>
> Thanks,
>
> Drake
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
--
Greg Egan
Alaska Renewable Energy
981 Gold Mine Trail Fairbanks, Alaska 99712
Phone: 907-457-4299; Fax: 907-457-4290; Email: gegan at renewalaska.com
URL: http://www.renewalaska.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list