Washing machine [RE-wrenches]

[Dan Whigham, SC Solar]

I use a Maytag. It uses 7 amps, compared to most conventional models using
13amps. Never had an issue in 4 years. Running an SW4024....

Regards,

Dan Whigham

SC Solar
7073 Henry Harris Road
Lancaster SC 29720
www.scsolar.com
803-802-5522



----- Original Message -----
From: "Allan Sindelar" <allan at positiveenergysolar.com>
To: <RE-wrenches at topica.com>
Sent: Friday, February 14, 2003 7:41 PM
Subject: Re: Washing machine [RE-wrenches]


> Maytag voids the warranty on its units if they find out it's running on
> inverter power. I think that this is true of all major mfgrs, but I don't
> know for sure. We don't ask, don't tell.
> The Staber has proven to hold up very well. I have yet to see a worn-out
> part, and they're set up for end-user service with factory support.
> Allan @PosNRG
>
> ----- Original Message -----
> From: "sunwise" <sunwise at cheqnet.net>
>
> > I have a client who needs to buy a new washer and he runs his home on a
> > 2,500 watt mod-square wave inverter (Heart - been very reliable).  I
> > seem to remember some posts a while back from some one who was running a
> > Neptune, and I would greatly appreciate any comments on this or other
> > mainstream washers running on modified, as well as any thoughts on the
> > Staber.
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================