Washing machine [RE-wrenches]
Jay Peltz, Peltz Power
jay at asis.com
Fri Feb 14 17:05:17 PST 2003
HI Scott,
The unit is standard front load. Cost is around $650-750 depending on where
and when.
Useage is around 150-180 watt/hr/load.
No problems to date, and warranty is no problem as they are a standard unit
so most all washer repair people have the parts and they are also easy to
work on.
jay
----- Original Message -----
From: "scott" <scott at backwoodssolar.com>
To: <RE-wrenches at topica.com>
Sent: Friday, February 14, 2003 4:36 PM
Subject: Re: Washing machine [RE-wrenches]
> Jay,
>
> We've had a couple customers complain that the Staber doesn't clean but
most
> are satisfied. Is the model you mention below a front loader? and what
about
> warranty issues...a problem? although it sounds like there have been no
> problems. And what does it cost? Staber runs around $985.00 Have you
> measured watt-hours per load?
>
> Thanks.
>
> Scott
>
> Backwoods Solar Electric Systems www.backwoodssolar.com
> Phone(208)263-4290 Fax (208) 265-4788 in Idaho, USA
>
>
> ----- Original Message -----
> From: "Jay Peltz, Peltz Power" <jay at asis.com>
> To: <RE-wrenches at topica.com>
> Sent: Friday, February 14, 2003 4:01 PM
> Subject: Re: Washing machine [RE-wrenches]
>
>
> > Hi Scott and all,
> >
> > I don't recommend the Stabir. They are too expensive, and don't wash as
> > well as the true front loads. Plus I have seem them catch on fire,
which
> I
> > think was from some mouse nest in the wrong spot.
> >
> > However, the Frigidare #gltf1670as I have in use on a few mod sine
> > inverters. One of them is a old Trace 724, which has run the washer and
> > dryer at the same time. (told them not to though). They have had no
> > problems, missed cycles etc.
> >
> > I know that this machine works just great. I have recommend many to my
> > clients in my area, and all are happy with them.
> >
> > jay
> >
> > Peltz Power
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list