600 VDC switches [RE-wrenches]
Jeff Yago
jryago at earthlink.net
Tue Feb 11 14:03:02 PST 2003
Travis:
My Cutler-Hammer spec. book gives the following info for the DH361URK
Safety switch:
3 Pole
30 amp rated @ 3 phase 240 to 600 volt AC
10 amp rated @ 1 phase 240 to 600 volt AC
5 amp rated @ 250 volt DC
Not rated for any load at 600 Volt DC
NOTE - This part number has the following note added:
"For 600 Volt DC rating, use 6 pole switch and series wiring, with
amp rating the same as the 2 pole model"
In other words, your salesman did not read the fine print at the
bottom of the page.
Jeff Yago
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list