Tubular towers and PV mounting [RE-wrenches]
Paul Gipe
pgipe at igc.org
Mon Nov 17 08:52:46 PST 2003
<x-flowed>
Matt,
The tower should have climbing rungs, a work platform, fall-arresting
cable/rack system, and anchorage points on the tower and near the turbine
for clipping your harness to.
Paul
Paul Gipe
208 S. Green St., #5
Tehachapi CA 93561-1741 USA
+661 822 9150
+661 822 8452 fax
pgipe at igc.org
www.wind-works.org
Wind Power: Renewable Energy for Home, Farm, & Business, ISBN 1-931498-14-8
(spring, 2004)
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
</x-flowed>
More information about the RE-wrenches
mailing list