Efficient room A/C info request [RE-wrenches]
Doug Pratt
dmpratt at sbcglobal.net
Thu Oct 30 18:12:22 PST 2003
Hi Allan,
The Energy Star site is your salvation for off-the-shelf efficient
appliances. This great consumer site tells you everything you need to
know about a particular appliance to be a smart shopper, then lists all
the most efficient units by make and model. The basic site address is
www.energystar.gov. Here's a link to the Room Air Conditioners page.
http://www.energystar.gov/index.cfm?c=roomac.pr_room_ac
1 kWh = 3414 BTU, so you're looking for an AC unit in the 4,000-5,000
BTU range. Fairly small as AC goes. Don't buy too big. Short run cycles
are less efficient. (It'll tell ya all about that on the site.)
Cheers,
Doug Pratt
-----Original Message-----
From: Allan Sindelar [mailto:allan at positiveenergysolar.com]
Sent: Thursday, October 30, 2003 5:11 PM
To: New wrenches posting
Subject: Efficient room A/C info request [RE-wrenches]
Fellow Wrenches:
We have been asked to provide a UPS system for a local medical billing
service company that needs uninterruptible AC power for servers, etc.
The
server room measured out with a Brand meter as a constant 1.03
kw-hr/hour
load. There is a window-mount air conditioner that cycles on and off to
draw
heat off of this otherwise windowless room. The A/C uses a 20A 250VAC
circuit. Some cooling must be part of the UPS load.
We are looking at more efficient ways to replace this A/C. We have 1.03
kwh
of constant heat being produced, plus summer ambient temps into the 90s.
It
has to be foolproof without needing attention; run off grid power when
it's
available, and battery/inverters when not. We haven't determined the
design
period of autonomy yet, but it shouldn't be necessary for this question.
I know nothing about air conditioners. Are there any high-efficiency
120VAC
window-mount units that can maintain normal (75F) temperatures with this
load? This is not a "solve my needs at any cost" job, either: solutions
must
be relatively simple and at reasonable cost, but load reduction is
always
cheaper than system capacity.
Looking for advice, please.
Allan
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list