12 volt differential controller [RE-wrenches]

[Nicholas Ponzio, VSE]

Tom and all,

This is a great thread! I was starting to wonder if there was a separate
List for thermal discussions. Is there?

Does anyone have suggested reading that describes the panel-pump IV matching
that Tom mentioned?

Thanks in advance.

-Nik


--
Nicholas Ponzio
Vermont Solar Engineering
PO Box 697
Burlington, VT 05402
toll-free 800.286.1252
local     802.863.1202
fax       802.863.7908
http://www.vermontsolar.com

> -----Original Message-----
> From: Tom Lane, Energy Conservation Services
> [mailto:solar8 at ehostingbiz.com]
> Sent: Wednesday, October 15, 2003 11:38 AM
> To: RE-wrenches at topica.com
> Subject: Re: 12 volt differential controller [RE-wrenches]
>
<snip>
> what you are doing --stop the crap and match the IV CURVE  to the pump
> requirements and the collectors square footage  and X Y slope '
</snip>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------