12 volt differential controller [RE-wrenches]
Mark Downing, Hurshtown Alt. Power
solarman4 at yahoo.com
Mon Oct 13 04:16:21 PDT 2003
Yes I've thought of building my own, but not designing it.
I was given a tip that Ivan Labs makes the controller I need, and I am for
the time being going to see about getting one of these.
--- Darryl Thayer <daryl_solar at yahoo.com> wrote:
> Is not a differencial controller a comparator with
> hysterisis? A Schmitt trigger? That is a simple
> circuit to build, have you thought of building your
> own?
> Daryl
>
> --- "Carl Emerson, Free Power Ltd."
> <freepower at freepower.co.nz> wrote:
> > Kurt,
> >
> > I would like to swap to this approach but I suspect
> > that it would take
> > some time to optimize the threshold or insolation
> > level that the pump
> > comes on at.... or do you not bother.
> >
> > Also the pump will continue to run when the water is
> > fully up to
> > temperature unless there is a thermostat control as
> > well.
> >
> > Maybe a combination of the two is needed and would
> > be more efficient.
> >
> > Carl Emerson
> > Free Power Ltd.
> > Auckland. NZ
> >
> > sunwise wrote:
> >
> > >Greetings Mark,
> > >
> > >I'm not going to be much help regarding the 12 volt
> > controller but I
> > >will mention a trend I see in the industry that
> > does away with
> > >differential controllers completely. Instead of
> > using such a
> > >controller, a small (20 watt) solar panel is wired
> > directly to a 12 volt
> > >circulating pump (typically a Hartel HEH10). When
> > the sun is shinning
> > >on the flat-plate collectors it is also on the pump
> > panel, etc. These
> > >systems work great, especially in off-grid homes.
> > >
> > >Kurt Nelson
__________________________________
Do you Yahoo!?
The New Yahoo! Shopping - with improved product search
http://shopping.yahoo.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list