ProSine 2.0 glitches [RE-wrenches]
Christopher Freitas - OutBack Power
cfreitas at outbackpower.com
Fri Sep 26 13:14:50 PDT 2003
Just to clarify what Ezra said - the VFX2812 was producing about 30%
more DC amps from the generator than the SW+2512 or ProSine 2.0 - which
was causing his generator's voltage and frequency to drop. The default
lower limit on the OutBack inverter/chargers is set at 100 VAC - which
is low (but it can be user adjusted). Turning down the MAX INPUT AMPS
setting (default of 60 amps) backed off the charger to what the
generator could deliver. The charger in the OutBack inverters can
deliver full rated current from as low as 90 vac input.
Christopher Freitas
OutBack Power Systems, Inc.
cfreitas at outbackpower.com www.outbackpower.com
Tel 360 435 6030 Arlington WA USA
Ezra at lasqueti.net wrote:
> Also recently ran a VFX which also delivered more charge amps from my
> old generator than the SW but did so at some pass through power penalty.
> I found that I needed to back off the input amps from the generator as
> the VX charger sucked the generator down to unacceptable limits of power
> quality passed through to the house.
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------
More information about the RE-wrenches
mailing list