Piezo gas stoves [RE-wrenches]

[James Lamb, Middle Fork Engineering]

Jeff 
Before you drill the jets out contact the manufacture.
Drillig the Jets out will change the design of burner and could produce
Carbon Monoxide due to incomplete combustion.
A change in design must pass specific tests by the American Gas Association
or Canadian Gas Association.
There are many factors that are considered in designing a burner and
extensive tests must be performed at a testing facility.
The manufactor will advise you as to what options you have.
If the burner appears ok due to a modification this is not enough due
various factors much too technical to go into here.
Carbon Monoxide is very dangerous and can poison someone over time at low
amounts or kill someone without them knowing it.
JIM LAMB
Middlefork Engineering  

-----Original Message-----
From: Jeff Oldham [mailto:starpower4u at juno.com]
Sent: Friday, September 19, 2003 11:51 AM
To: RE-wrenches at topica.com
Subject: RE: Piezo gas stoves [RE-wrenches]



I have a Peerless Premier Pro SS model and like it a lot with one big
exception - the burners are only 8000 btu max. and low is not quite low
enough but usable. High is pretty wimpy and most decent stoves out there are
12,000 - 14,000 btu. I'm about to drill out the jets but would like feedback
from anyone who has done this and can recommend a drill size?

Thanks,
-jeff o


>From the Solar, Wind and Hydro powered office of Jeff Oldham

________________________________________________________________
The best thing to hit the internet in years - Juno SpeedBand!
Surf the web up to FIVE TIMES FASTER!
Only $14.95/ month - visit www.juno.com to sign up today!

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------