Parking lot array mounting [RE-wrenches]

Jeff Yago jryago at earthlink.net
Tue May 20 12:21:34 PDT 2003


I am in early stages of design for a grid tied array for a large
manufacturer.  They want to use a frame structure over an existing
outdoor open parking lot.  I helped install some of the pv on the 540
kW parking lot installation at the Cal Expo in Sacramento, but the
structure was already built by others when we started installing pv
and I was not able to make contact. I was looking for a non-tracking
version of this project's mounting structure.

I am trying to find a source who could provide a similar galv. steel
"T" shaped frame structure over a parking lot for my project, which
could be in the 100 kW range.  I was hoping for a "standard" type
structural design and do not want to "re-invent the wheel."  In other
words, the spacing for parked cars is fairly standard, and we can
adjust module size and quantity per array span to fit any existing
standard frame dimensions.

Anybody know a structural firm that has experience in this type of
frame design?

Thanks,

Jeff Yago
Virginia

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================





More information about the RE-wrenches mailing list