300V DC Power Supply? [RE-wrenches]
David Blecker
blecker at seventhgenergy.org
Tue Apr 29 18:43:11 PDT 2003
<x-flowed>
Jeff,
I share your concerns about fussin with things that ain't broke. But these
are WindyBoy's -- and we don't have enough experience with them in field to
go out untested. Also, I'm designing a monitoring system with the
Windy-Boy-Sunny Boy Control Plus that will record the wind speed (from NRG
#40 anemometers through NRG's wind speed freq to voltage interface devices)
into the SBC+ analog input channel along with the standard energy
production data to give us time-series performance curves for the turbine.
Whew. That was a mouthful. Where's my beer? So, I have to dig in, open
up the case, and test. Did I mention the system is being installed as part
of an MREA workshop? We need to have our act together to avoid surprises
and excessive embarrassment.
The C&H Sales link is way cool!
Dave
At 05:45 PM 4/29/2003, you wrote:
>I really don't think that it is worth it, odds are way in favor of it
>working just fine in the field. So if it ain't broke don't fix or fuss
>w/it. I also don't see a good enough rational for the added exposure to
>high voltage on your part or the risk to shorting out wires or components
>within the inverter. Everytime you remove an inverter cover additional
>risks are "uncovered". Besides, when you open it up in the privacy of your
>shop you'll probably have a beer in one hand! Good for the isolation of
>both hands from live wires, bad for inverter bathing.
>
>However, if you must, try C and H Sales Co. 800.325.9465 or www.cand
>hsales.com. They have a great selection of new and surplus electronic
>supplies and various goodies. A candy store for Wrenches.
>
>-jeff
>
> From the Solar, Wind and Hydro powered office of Jeff Oldham
>
>________________________________________________________________
>The best thing to hit the internet in years - Juno SpeedBand!
>Surf the web up to FIVE TIMES FASTER!
>Only $14.95/ month - visit www.juno.com to sign up today!
>
>- - - -
>To send a message: RE-wrenches at topica.com
>
>Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
>List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
>Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
>Hosted by Home Power magazine
>
>Moderator: michael.welch at homepower.com
----------------------------------------------------------
David Blecker, P.E., Director
Seventh Generation Energy Systems
608-424-1870 (ph) 424-1810 (fax)
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list