Where is Ground Clamps [RE-wrenches]

[Bob-O Schultze, Electron Connection]

<x-flowed>
Bill,
I certainly agree that an ungrounded energized module frame could be 
bad news. Have you EVER seen one? Has anyone else? It seems to me 
that the likelihood of an internal short causing that to happen is 
almost nonexistent. True, a connecting conductor could rub the 
insulation off and short to a frame (another reason to use flexible 
nonmetallic conduit instead of MC cables) but that makes the same 
case for NOT grounding the module frames.
Best, bob-O

>I believe that we need racking systems that provide for effective grounding
>of all the modules. This is a very real safety issue. An energized module
>frame without effective grounding is a huge hazard.
>
>Bill.

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================


</x-flowed>