Where is Ground Clamps [RE-wrenches]

[Jay Peltz, Peltz Power]

Hi Dean,

Can you give me the code # that states all panels must be grounded in
addition to the metal frame they are on?

One installer I know puts in the permit all grounding to be done in
accordance with 250.136(a).  This allows for only a single ground wire from
each seperate array.  Makes it much easier.

thanks,

jay

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================