wind wiring [RE-wrenches]

matthew tritt solarone at charter.net
Fri Feb 28 18:20:10 PST 2003


Kurt,

Sounds like the three households are going to qualify for Family Feud to me.
There's no truly equitable method of supplying equal amounts of energy from
your Proven to separate battery banks, since one of them will always be a
little lower than the others. The right way to do it would be to centralize
the entire power system and meter the output to the three homes from a
common distribution center.

Or so I believe!

Matt T
----- Original Message -----
From: "sunwise" <sunwise at cheqnet.net>
To: <RE-wrenches at topica.com>
Sent: Friday, February 28, 2003 6:11 PM
Subject: wind wiring [RE-wrenches]


> Greetings all,
>
> Three folks on the B.O.D. of the Midwest Renewable Energy Association
> live off-grid near Amherst WI.  They are planning to add a 2.5 KW Proven
> this spring and want it to help power their three, currently
> stand-alone, PV systems.  Does anyone have experience wiring a wind
> machine to more than one home?  How did you go about doing so?  Do you
> take the wild, three phase ac to each home or rectify at the base of the
> tower?  Will the battery with the lowest SOC get the bulk of the
> current?  Would the same type of diversion controller be necessary at
> each home (one has an SW and there was thought of using the 3 AUX relays
> to stage some diversion loads on that home).
>
> All homes are currently 24VDC.  Any thoughts or heads ups would be
> greatly appreciated, including HV/LV with transformers and use of
> aluminum wire for these runs, which are 300-400 feet.
>
> Much thanks in advance -- Kurt Nelson
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
>

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================





More information about the RE-wrenches mailing list