SW4048 remote start query [RE-wrenches]
Lawrence Elliott
larry at energyoutfitters.com
Fri Feb 28 05:54:31 PST 2003
----- Original Message -----
From: "Robert Warren" <robertwarren at mail.com>
To: <RE-wrenches at topica.com>
Sent: Saturday, March 01, 2003 1:34 AM
Subject: RE: SW4048 remote start query [RE-wrenches]
> Eric,
> You may need to find a 12 volt timer switch that you can use to
connect
> to the R-7 relay for the "Slave" inverter. The R-7 relay will not take
> the load of running a contactor,
Just a reminder to check out the Kilovac hermetically sealed contactors.
They have what they call an economizer on the coil that is essentially a
DC/DC converter.It accepts from 9 to 36 volts DC at a constant 200
milliamp.
Contacts rated 200 contin @200vdc and 2000 amps break.
Great units and they are relatively cheap.
>
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list