pole mount 150 watt modules [RE-wrenches]
Nick Nicholas, APS
APS at SBCGLOBAL.NET
Mon Feb 24 11:19:19 PST 2003
Hi Keith:
We installed four 8" poles last month, and will install the arrays as
part of an SEA workshop in a few weeks. We used a torch to cut the pipe to
12', so each pole was not excessively heavy. It did take 3 guys and a winch
to erect the poles. By the way, I have four 9' scrap pieces of the 8" steel
pipes.
Alternative Power Systems
www.alternativepowersystems.com
aps at sbcglobal.net
135 Colfax Ave.
Grass Valley, CA 95945
(530) 274-0588 phone
(530) 274-0589 fax
----- Original Message -----
From: "Jay Peltz, Peltz Power" <jay at asis.com>
To: <RE-wrenches at topica.com>
Sent: Thursday, February 20, 2003 7:07 AM
Subject: Re: pole mount 150 watt modules [RE-wrenches]
> HI Keith,
>
> I just installed a 8 panel shell 150's. 6" pole. You'd better have a
bunch
> of strong guys to move that 8" pole.
>
> jay
>
> peltz power
>
> - - - -
> To send a message: RE-wrenches at topica.com
>
> Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
>
> List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
>
> Check out participant bios: www.mrsharkey.com/wrenches/index.html
>
> Hosted by Home Power magazine
>
> Moderator: michael.welch at homepower.com
>
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list