Washing machine [RE-wrenches]
Bob-O Schultze, Electron Connection
econnect at snowcrest.net
Fri Feb 14 10:36:15 PST 2003
<x-flowed>
Kurt,
Dunno about the others, but if you tell Staber upfront that you are
going to run their machine on a mod-sine inverter, they will put in a
special control board. No extra charge, as I recall.
Best, bob-O
>Greetings all,
>
>I have a client who needs to buy a new washer and he runs his home on a
>2,500 watt mod-square wave inverter (Heart - been very reliable). I
>seem to remember some posts a while back from some one who was running a
>Neptune, and I would greatly appreciate any comments on this or other
>mainstream washers running on modified, as well as any thoughts on the
>Staber.
>
>Thanks much,
>Kurt Nelson
>SOLutions
--
Bob-O Schultze, Electron Connection
PO Box 203, Hornbrook, CA 96044
800.945.7587 or 530.475.3402
fax 530-475-3401
www.electronconnection.com
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
</x-flowed>
More information about the RE-wrenches
mailing list