C40's and SW's [RE-wrenches]

[Eric Smiley]

I didn't see any mention of the SW Sell Voltage in the posts, which has
to be less than the C40 bulk and float voltages, but greater than the SW
float voltage.

However, (I believe it was Bill that pointed this out to me) the Sell
Voltage is not temperature compensated.

Eric Smiley
Project Leader
Photovoltaic Energy Applied Research, Technology Centre
British Columbia Institute of Technology
Burnaby Campus

NE25 - 3700 Willingdon Avenue
Burnaby, British Columbia
Canada V5G 3H2

phone: 604.432.8657    fax: 604.436.0286
esmiley at bcit.ca             www.tc.bcit.ca

The information contained in this E-mail is intended for the addressee
only.  If you have received this in error please delete it.

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================