Wind query [RE-wrenches]
Chris Worcester
chris at solarwindworks.com
Wed Feb 5 09:01:20 PST 2003
Hi Allen,
Is the tower robust enough for the AWP 3.6? This is a heavy machine at 250
pounds. What was the rotor dia. of the Wincharger? The AWP is 11 feet and
requires a 4 inch pipe tower mount.
I prefer the RV Power SB 50 to the built in PV controllers on the EZ Wires.
you'll capitalize on the array that way.
The H80 is a low wind regime turbine not designed for strong winds at
sustained durations. If the likelihood of high winds are eminent go with the
H40, on a budget.
There is also the Bergey XL.1 24V wind turbine which will require it's own
controller. This is a good machine for those on a budget also.
If he could afford the Proven WT600, this would be the most robust option.
With a 22 mph rated wind speed it performs well in low wind speed areas,
where not a lot of power is required.
Sincerely,
Chris Worcester
www.solarwindworks.com
chris at solarwindworks.com
Toll Free: 877-682-4503 Fax: 530-582-4603
USA Distributor of Proven Wind Turbines
"Proven Energy Solutions"
- - - -
To send a message: RE-wrenches at topica.com
Archive of previous messages: http://www.topica.com/lists/RE-wrenches/
List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm
Check out participant bios: www.mrsharkey.com/wrenches/index.html
Hosted by Home Power magazine
Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net
EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com
TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================
More information about the RE-wrenches
mailing list