Lags vs. Timberloks [RE-wrenches]

[Jeff Clearwater, Village Power Design]

<x-flowed>
Hi All,

My carpenter buddy says I should try Timberlok® 
fasteners instead of lags.  Anyone have any 
experience with them?

Supposedly they do not need predrilling, 
supposedly have 725 lbs/in pullout strength are 
lubricated for driving with low rpm drill are way 
cheaper - have black epoxy coating.

Thanks,

jc
--
~~~~~~~~~~~~~
Jeff Clearwater
Village Power Design Associates
Sustainable Energy & Water Solutions for Home & Village
http://www.villagepower.com
gosolar at villagepower.com

877-SOLARVillage
413-256-6777,  Fax 413-825-0372
61 Baker Rd
Shutesbury, MA 01072

PO Box 115
Boonville, CA 95415
707-895-9015, Fax 707-897-0024
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~`~

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael.welch at homepower.com

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------


</x-flowed>