XL.1 and generator fun [RE-wrenches]

[Kirk Herander, VSE]

Group,
Over the weekend, I got a call from a customer who's Bergey XL.1 fell to the
ground. Not the tower, just the machine itself. It turns out the yaw shaft
broke in two just above the slip rings. Bergey says they've seen "a few"
like this as a result of a casting defect. it was probably already weak, and
the hurricane-remant winds pushed it over the edge, literally. Anybody heard
of this before??

PS. I also had a customer's generator shed, and therefore generator (a
Kohler 8.5 RMY) burn to the ground last weekend, as the result of a propane
leak, so the fire marshall suspects. Thank God the structure was 100' away
from the house and there was no wind. Never install a generator inside an
attached structure!!!

Kirk

Vermont Solar Engineering
a Xantrex / Trace Certified Dealer Charter Member
Kirk Herander
PO Box 697
Burlington, VT. 05402
www.vermontsolar.com
www.backeastsolar.com
800.286.1252 - 802.863.1202
fax 802.863.7908

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
--^----------------------------------------------------------------
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
--^----------------------------------------------------------------