Mating an FX inverter to a Brand X disconnect [RE-wrenches]

[Phil Undercuffler, Positive Energy]

Anybody thought up a good way to mate an FX inverter to a Trace DC
Disconnect in a code compliant manner?  The FX-DCA terminates too far away
from the back plane to ever line up, apparently even with an offset nipple.
Using 2" metal flex would require the inverter to be mounted at least a foot
or so away from the disconnect (use 2 2" flex 90s and doing a cross-over
from high inverter to low KO?  That's a spendy proposition, and only
possible with single inverter systems)

What is the best upgrade path for those clients with Trace or Class R fused
disconnects?

Phil Undercuffler
Positive Energy
phil at positiveenergysolar.com

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com
==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================