Test and Meter Accuracy [RE-wrenches]

[Joel Davidson]

My plus/minus 2% meter says 55 volts is somewhere between 53.9 and 56.1
volts.
The C40 plus/minus 5% meter says 55 volts is somewhere between 52.25 and
57.75 volts.
Ralph Heisey at Bogart Engineering compared his current reading
Trimetric and calibrated shunt to his C40 which with a copper wire
shunt. His C40 meter reads about 15% lower.
In 1994, Keith Emery at NREL wrote, "When I compare with other
laboratories a difference of 10% for cells or module is often
encountered unless we have had substantial interactions to reduce the
uncertainty.
The point is don't get hung up on tenths of a volt. You're still going
to have to fine-tune for best performance.
Best regards,
Joel Davidson
"Gotta go now and catch a plane departing at 6:32PM."
"6:32? Yeah, sure."

- - - -
To send a message: RE-wrenches at topica.com

Archive of previous messages: http://www.topica.com/lists/RE-wrenches/

List rules & etiquette: http://www.mrsharkey.com/wrenches/etiquete.htm

Check out participant bios: www.mrsharkey.com/wrenches/index.html

Hosted by Home Power magazine

Moderator: michael.welch at homepower.com

==^================================================================
This email was sent to: michael_welch at sbcglobal.net

EASY UNSUBSCRIBE click here: http://topica.com/u/?bz8Qcs.bz9JC9.bWljaGFl
Or send an email to: RE-wrenches-unsubscribe at topica.com

TOPICA - Start your own email discussion group. FREE!
http://www.topica.com/partner/tag02/create/index2.html
==^================================================================